Page 2 of 2

Re: Miller firing pin info needed- photos and measurements

Posted: Sun Sep 10, 2023 8:15 pm
by carlsr
kenneth wrote: Sun Sep 10, 2023 7:33 pm I looked at the Pedosoli(misspelled) web site. and they list a firing pin for the Trapdoor that looks a bit like yours.
Thanks kenneth, there's a couple listed that look close but they seem to be a tad short compared to the penny in the photo.
Do you have a link in case I'm looking at the wrong one?

Re: Miller firing pin info needed- photos and measurements

Posted: Tue Sep 12, 2023 2:03 am
by kenneth
Davide Pedersoli Reproduction Firearms. It is a Italian company. They make reproductions of Trapdoors and of course other firearms.

Re: Miller firing pin info needed- photos and measurements

Posted: Sat Nov 04, 2023 10:04 pm
by carlsr
GREAT NEWS!! After 2 agonizing months I finally received a new made firing pin from a fantastic gun smith, and just down the road from me.
Picked up the rifle today with the firing pin installed then headed to my reloading cave to give it a try. I put in a blank case, lined up the primer to where I thought it should be then pulled the trigger and nothing 😩
Okay, so I spun the primer a little lower like 3:00 then pulled the trigger😃 fired like it should!!
Tried 2 blanks and both fired, now to hit the range with a live round!!!
Wasn't exactly cheep to have it made but well worth it. Still going to keep looking for an original but for now I have one that works well.

Re: Miller firing pin info needed- photos and measurements

Posted: Sun Nov 05, 2023 1:29 am
by Tom Trevor
carlsr, Please post a picture of the new pin. Someone might have an original in their unknown parts box.