No Dick, that table is part of the outdoor set that The Memsahib’s got sitting on the West patio.
The table you’re familiar with is on the North patio.
One of my 1868’s
Moderator: 45govt
-
- Posts: 350
- Joined: Fri Mar 10, 2023 10:59 pm
Re: One of my 1868’s
- Attachments
-
- C6D40502-9C92-4A22-AA72-272E72F17BFE.jpeg (151.16 KiB) Viewed 2568 times
Last edited by Fred Gaarde on Fri Mar 31, 2023 12:18 am, edited 2 times in total.
-
- Posts: 350
- Joined: Fri Mar 10, 2023 10:59 pm
Re: One of my 1868’s
Here’s the table I usually use for taking photos of stuff.
Last edited by Fred Gaarde on Thu Mar 30, 2023 6:31 pm, edited 1 time in total.
-
- Posts: 350
- Joined: Fri Mar 10, 2023 10:59 pm
Re: One of my 1868’s
The practice of using water to clean the trapdoor bores must be why I’ve only seen one Sewer Pipe bore on a trapdoor. The water would of course dissolve the corrosive salt like residue from the fired primer.
Oils won’t do that.
The bores on all of my 1868’s are all really nice. Mirror like.
Oils won’t do that.
The bores on all of my 1868’s are all really nice. Mirror like.
- Dick Hosmer
- Posts: 544
- Joined: Tue Mar 07, 2023 7:05 pm
- Location: Northern CA
Re: One of my 1868’s
I know, back when I was buying, my friends would often remark on the minty bore of some low-grade TD I'd picked up because of a scarce feature. Almost got to be a joke. TDs: tired outside, near-new inside. Krags were often just the opposite - really nice on the outside, but like a sewer in the bore.